Tinker board 3N with impressive temperature range - ASUS

With the newest Tinker board 3N series, ASUS IoT introduces a upgraded single board computer with great performances.

Besides the Quad-cores ARM Cortex-A55 SoC, the possibility of supporting multiple displays and wide range DC power, the temperature range is a real benefit.

With the operating temperature range of  -40 to 85°C the Tinker Board 3N is ideal for everything from outdoor use to hectic factory environments.

Features
- 64-bit, quad-core Arm Cortex-A55 processor, built on the Arm v8 architecture
- Dual LAN built in, and PoE PD supported via expansion module
- 4G, 5G, Wi-Fi 5 and Wi-Fi 6 supported via expansion module
- LVDS, eDP, COM and CANbus embedded and industrial interfaces supported
- Wide -40 to 85°C operating-temperature range
- Linux Debian, Yocto and Android operating systems supported

This board is available in several versions: 3N PLUS, 3N and 3N Lite.
 

High-performance WiFi 6E and BLE (Bluetooth 5.2) module - Quectel

Quectel’s latest addition to their WiFi and BLE module portfolio features the FC66E.

The FC66E is a high-performance WiFi 6E and BLE 5.2 module in LCC package.This WiFi/Bluetooth module supports 2.4GHz, 5GHz and 6GHz triple-band and BLE (Bluetooth 5.2).

It can be used to establish WLAN and Bluetooth connections. Supporting 2x2 + 2x2 MIMO, it provides a maximum data rate up to 3000Mbps.

With a compact and unified form factor of 19.9mm × 18.0mm × 2.1mm, FC66E is an ideal WiFi/Bluetooth solution for size-sensitive applications.

Designed with a reliable PCIe 3.0 interface to provide WLAN capability, FC66E achieves low-power and high-speed data transmission.

This, coupled with its compact size and extended temperature range, enables the module to meet WiFi/Bluetooth application design requirements in industrial, consumer and automotive fields.
 

Would you consider Transflective displays?

The main advantage of Transflective displays is that they offer good sunlight readability.

Another benefit of Transflective Panels is that they tend to use less power than other types of displays.This is because they do not require backlighting, which can use a lot of power.

Advantages of transflective LCDs

High Visibility and Contrast: Transflective LCDs combine the benefits of reflective and transmissive screens and provide good visibility in both bright sunlight and low-light environments.

Low power consumption: Transflective LCDs do not require the backlight to be on all the time, reducing power consumption and extending battery life when the backlight is off.

Wide Viewing Angles: Transflective LCDs have wider viewing angles than reflective LCDs.
 

LoRa, Bluetooth 5 Low Energy Module - Northern Mechatronics

The NM180100 is a global IoT solution. Ideal for long range, low power applications combining the transmit power of Semtech's LoRa SX1262 with the processing power of Ambiq's Apollo3 Blue. This onboard MCU can be used to integrate the customer application.

Bluetooth 5 Low Energy is integrated with the Apollo3 microcontroller. The Apollo 3 possesses a secure interface (ISO 7816) including secure boot and secure OTA firmware upgrade over Bluetooth. The operating system, radio drivers and wireless communication protocol stacks are provided in the form of source code.

This enables the system integrator to fully leverage the module’s
existing regulatory grants (such as IC or FCC) where applicable.

Full programmability allows the module to function as a host while maintaining all RF, mixed-signals, and digital functions in a single device without the need for additional microcontrollers.

Features
LoRa: 863-870 MHz (Europe) 902-928 MHZ (US)
Maximum Transmit Power: +22 dBm
Receiver Sensitivity: -147.6 dBm
Bluetooth 5 Low Energy:​ 2.402-2.480 GHz
Host Processor:​ Ambiq Apollo3 ARM® Cortex® M4 with FPU up to 96MHz
Memory: Flash: 1MB on-chip, RAM: 384 kB
Power:​ Processor 6uA/MHz ,Sleep: 2.7uA in deep sleep mode, RAM retention
Module Size: 12.8mm x 12.8mm x 2.4mm
Approvals: FCC/IC, CE, LoRa Alliance™ pending
 

At the same time as the E&A, the industrial electronics fair there is also the LABNL, the laboratory trade fair.

The LabNL trade fair demonstrates the latest technologies, innovations, solutions and tools for the laboratory.

LabNL is the place to be for laboratory technicians, lab managers, researchers and R&D managers who are looking for specific solutions.