2, 3 and 8A synchronous switching buck regulators - MaxLinear

Fully integrated, high-efficiency synchronous step-down converters that require a minimum number of external components.

Offering very compact solutions with 2A/ 3A and 8A continuous output current over a wide input range.

MxL76502 / MxL76503 / MxL76508
■ Input voltage range: 4.5V to 18V (MxL76508 3V to 18V )
■ Output voltage range: 0.6V to 18V
■ 2A / 3A / 8A continuous output current
■ Supports 100% duty cycle low-dropout operation
■ Stable operation with low ESR ceramic output capacitors
■ Fast pulse-width modulation COT control with superior transient performance
■ ~700KHz switching frequency (Mxl76502&03 720KHz Mxl76508 700KHz
■ Internal soft-start ( MxL76508 programable)
■ Integrated high-side (HS)/low-side (LS) power switches
■ Accurate EN/UVLO threshold
■ High-efficiency operation at light load (MxL76502N)
■ FPWM mode of operation (MxL76502/3/8A)
■ Ultra-sonic (UA) mode of operation (MxL76508U)
■ Thermal shutdown with auto-recovery
■ Hiccup mode short-circuit protection
■ Available in a 16-pin 3mm×3mm QFN package (MXL76508)
■ Available in a 6-pin SOT23-6L package
 

MxL76502

MxL76503

MxL76508

LTE Cat 4 module optimized for M2M and IoT applications - Quectel

The EG950A-ENL benefits from global LTE coverage with multiple-input-multiple-output (MIMO) technology meeting smart metering project needs for data rate and reliability.

In addition, the long lifespan of smart meters, which can extend to more than a decade, is supported thanks to the modules’ firmware upgrade over-the-air (FOTA) capability.

Support for LTE 450, which utilizes the 450MHz frequency band to provide an energy-efficient long-range alternative to 2G and 3G, is an appealing capability for the smart meter sector.

LTE is ideal for less data intensive applications and therefore well-suited for enabling smart meter connectivity, while offerings service providers a way to provide long range coverage over large areas cost effectively. LTE 410 will also be adopted because it offers the same benefits to smart meter deployments as LTE 450.

The EG950A-ENL supports the Europe, APAC, Australia, New Zealand and Latin America regions.

In addition to smart meter applications, the Quectel EG950A-ENL is applicable to use cases such as customer premise equipment and gateways.

■ LTE 450/410 module
■ LGA form factor
■ Dimensions: 29.0 mm × 25.0 mm × 2.4 mm
■ Extended temperature range: -40°C to +85°C
 

4.3” IPS TFT display modules - Raystar

The RFE430W-AWW-SNN and RFE430W-AWH-SNN are 4.3” IPS TFT display modules that feature a 4-line data QSPI interface, enabling data transmission speeds up to four times faster than standard SPI.

Both modules offer a resolution of 480×272 dots and utilize IPS technology to provide wide viewing angles (80/80/80/80 degrees) and a contrast ratio of 800:1.

They differ in brightness: 500 cd/m² for the RFE430W-AWW-SNN and a high brightness 1000 cd/m² for the RFE430W-AWH-SNN model

The RFE430W-AWW-SNN is suitable for industrial control systems, instrumentation, and gaming-related products. In contrast, the RFE430W-AWH-SNN is ideally suited for outdoor equipment, handheld devices, and card reader/access control systems.
 

Size	4.3” TFT LCD Display
Resolution	480 × 272 dots
Module Dimension	105.5 (W) × 67.2 (H) × 2.95 (D) mm
Active Area	95.04 × 53.856 mm
LCD Type	TFT, Normally Black, Transmissive
View Direction	80/80/80/80 (IPS)
Backlight Type	LED, Normally White
Driver IC	NV3041A-01
Interface	4-line data QSPI
Touch Panel	Without Touch Panel
Surface	Glare
Brightness	500 cd/㎡       |   1000 cd/㎡
Operating Temperature	-30~+80 °C

Both modules are equipped with the NV3041A-01 driver IC and support a wide operating temperature range of -30 to +80°C, ensuring stable performance across various application environments.
 

Wi-Fi 6 & Bluetooth 5.3 module for high-performance short-range connectivity - Quectel

Utilizing the 2.4GHz and 5GHz Wi-Fi frequency bands, the FCM363X boasts a high-performance ARM Cotex-M33 processor clocked up to 260MHz and features built-in 1.2MB SDRAM and 8MB flash memory. PSRAM is also supported with an optional expansion to enable more complex applications.

The module is designed with multi-layered security features, ensuring robust protection for embedded systems. It integrates EdgeLock® Secure Enclave (Core Profile), enabling secure boot with a hardware root of trust, secure lifecycle management, and firmware update protection, while restricting unauthorized debug access.

For enhanced system security, Arm® TrustZone® technology creates an isolated execution environment, safeguarding critical operations. The module also supports hardware cryptography, encrypted flash storage, and secure key management mechanisms to further strengthen data protection.

Finally, to ensure secure wireless communication, the module implements WPA2/WPA3 authentication, Wi-Fi enterprise security, TLS encryption, HTTPS, and Bluetooth LE secure connections, delivering end-to-end security across connected applications.

Ideal for deployments of devices with long lifecycles in smart home or industrial IoT scenarios, the Quectel FCM363X supports GPIO, SDIO, USB, UART, SPI, I2C, I2S, ADC, LCD and PWM interfaces in the QuecOpen solution.

■ LGA and LCC form factor
■ IEEE 802.11a/b/g/n/ac/ax
■ Approx 1.51g
■ 25.5mm × 18.0mm × 3.16mm
■ Operating temperature range: -40°C to +85°C

The module can be supplied with an RF coaxial connector or PCB antenna.
 

Need a robust and high-performance terminal block for your PCB applications?

Discover our 5.08 mm pitch terminal block, designed for secure connections and optimal durability in industrial environments.

This green terminal features 2-24 pins and a rising cage clamp termination for strong, reliable wire connections, with a horizontal orientation for easy integration into your design.

Key features:
- Type: Terminal block
- Pitch: 5.08 mm
- Pins: 2-24 pins
- Orientation: Horizontal
- Termination: Rising cage clamp
- Operating Temperature: -40°C to +105°C
- Wire Gauge: 30–12 AWG
- UL Rating: 20A / 300V
- IEC Rating: 20A / 250V

Built for demanding industrial and electronic applications, this terminal block ensures secure electrical performance and long-term reliability.
 

Introducing the Eagle Core with 640 x 480 resolution - Seek Thermal

The Eagle Core is Seek's next-generation sensor technology. With significant improvements in image clarity, sensitivity, and frame rates. This sets a new benchmark for thermal imaging performance.

Eagle Core offers a new 640 × 480 high-resolution array, providing 2× the resolution per dimension and 4× the total pixels compared to Mosaic Core.

Eagle Core 600
640 x 480 Sensor Resolution
12 μm Pixel Pitch
24° or 60​° Horizontal Field of View
Up to 60Hz Frame Rate
MIPI CSI-2 and I2C
< 1 W (Max)
32 x 25 x 25mm (L x W x H)

The Eagle Core will also be available with a 320 × 240 resolution.

Eagle Core 300
320 x 240 Sensor Resolution
12 μm Pixel Pitch
24° or 56​° Horizontal Field of View
Up to 60Hz Frame Rate
MIPI CSI-2 and I2C
100 mW (Max)
23 x 20 x 21mm (Same as Mosaic Core)