Regenerative Power Supply Unit for Servo Systems - Sanyo Denki

Sanyo Denki has developed and launched a power supply unit that contributes to energy saving of equipment. And is expanding its lineup of SANMOTION R AC servo systems.

This power supply unit contributes to reducing the power consumption of equipment by reusing regenerative power. It is suitable for injection molding machines, conveying robots and other applications. 

Energy Saving 
When a rotating motor decelerates, the motor functions as a generator and produces regenerative power. This unit can reuse this regenerative power by feeding it back to the power grid, reducing the power consumption of your equipment. 

Compact and Lightweight 
The RM3PBR370 integrates a converter (rectifier) and power regenerative unit into a single compact unit. It contributes to the downsizing and weight reduction of equipment compared to the case using a separate converter and an external regenerative power recovery unit. 

Visualize Power Conditions and Power Consumption 
This product measures power supply voltage, current, and frequency, enabling users to check the power supply conditions on the amplifier unit. In addition, the power consumption of equipment can be accurately calculated, and power savings can be checked. 
 

250W Ultra Compact 2” x 4” open frame single output AC/DC switching power supply - FSP Group

FSP Group has released a new 250W ULTRA COMPACT 2” x 4” open frame single output AC/DC switching power supply, an ideal space saving solution for ITE (Information Technology Equipment) and Networking applications.

FSP250-H24 A Series has a universal input range of 90 to 264 VAC, PFC build in, with less than 0.5W input power consumption (standby) at 0.2W load to meet Energy Star requirement, and optional HVDC 128-310V input operation. It can deliver up to 250 watts of continuous power at 14 CFM forced air cooling or 150 watts continuous power at convection cooling  (-20℃~+50℃ operating temperature).

Power is delivered through 12V / 24V / 54V single output channel, with outstanding 91% power efficiency (230Vac) .The PSU is housed in an ULTRA COMPACT 2" x 4" x 1.22" (above pcb) , makes it suitable for 1U chassis. 

FSP250-H24 A series is Class-I (with Protection Earth) safety construction design, IEC 62368-1 safety standard certified and CE mark. it supports OCP, OTP, OVP and OPP circuit protection, 1.5KVac isolated between PE and RETURN and surge protection ±2 KV diff., ±4 KV com and complies with EN 55032 Class B radiated emission.
 

Wi-Fi 7 & Bluetooth 5.3 LGA module- Quectel

The FGE573Q is a small form factor LGA module supporting Wi-Fi 7 and Bluetooth 5.3. With 4K-QAM and 160MHz bandwidth,

The FGE573Q achieves a maximum data rate of 2.9Gbps. while supporting ultra-low latency for real-time response.

The FGE573Q Bluetooth functionality supports BLE, Multi-link operation (MLO), and LE audio functions with a maximum data rate of 2Mbps and BLE Long Range. 

The higher data rate when compared to Wi-Fi 6 and older standards, opens up this module to new use cases like cloud gaming, 8K A/V streaming, AR/VR, industrial IoT, and telemedicine.
 

LoRa(WAN) LGA module - Quectel

The KG200Z is a high-performance LGA, LoRa module launched by Quectel, which supports ultra-low power consumption and long-range wireless transmission applications.

It integrates an ARM Cortex-M4 core with the modulations of LoRa,(G)FSK, (G)MSK, and BPSK, supporting LoRaWAN standard protocol.

The KG200Z is available in either a 470-510MHz version or a 862-928MHz version.  Additionally, it incorporates AES hardware encryption for enhanced security.

The low power consumption and long transmission range of LoRa(WAN) allow the module to be used for a different range of products such as smart locks, door sensors, gas and water leak detection, pet tracking, indoor air quality sensors, HVAC monitoring, smart parking and traffic monitoring, utility metering, waste management, air quality monitoring, as well as asset management tracking.
 

Ambiq Named IoT Semiconductor Company of the Year 2024

As manufacturer of the lowest power microcontrollers in the market which are optimized for use in wireless sensors, IoT and voice-controlled products, activity & fitness monitors, remote controls, smart cards, wearables and other power-sensitive products where battery power is required.

The products range delivers a highly integrated solution, with or without bluetooth connectivity.

The ultra-low power Apollo MCUs, based on their SPOT™ platform, provide industry-leading power performance in both active and sleep modes, achieving battery-life ranging from weeks, to months and even years.

TOP-electronics is proud to be partner of Ambiq and congratulate them with winning this title for the 3rd time at the IoT Breakthrough Awards!

Let's meet at the Embedded World, hall 3, booth 301.
 

High performance, low power Digital MEMS Microphone - Goermicro

Goermicro, a market leader and global provider of MEMS Microphones, is expanding the MIC portfolio with a new Digital MEMS Microphone with a high SNR of 68,5dB and 400uA current.

Samples of this high performance, low power Digital MEMS Microphone are now available. Pressure sensors, VPU sensors, ToF sensors or air flow sensors are also available.

Goermicro serves the consumer electronics, communications, industrial and vehicle markets.
 

Part number	SD18OB371-167	Interface	PDM
Sensitivty	-37+1dB	AOP	128dBSPL
Size	3.5*2.65*1.0 mm	Status	Production
SNR	68,5dB	Current	400uA